Profiler til vinylgulve

Et vinylgulvs æstetiske udtryk bestemmes i vid udstrækning af funktionelle detaljer som gulvlister, profiler og trappeforkanter. Pergos sortiment af gulvlister og profiler er designet til at give et pænere og mere holdbart Pergo-gulv.

PGVINCP Vinyl tilbehør Sand Beach Oak PGVINCP40103
5 muligheder med 1 profil
PGVINCP(-)
Giv dit Pergo gulv den perfekte finish. Skær profilen til i den ønskede form med den medfølgende kniv.
Produktinformation: 2000 x 45 x 8 mm
NYHED
NEVRADPSILV Vinyl tilbehør Adapterprofil (Rigid) NEVRADPSILV
Adapterprofil (Rigid)
NEVRADPSILV
This very slim and elegant profile can be used to make the transition between a higher and a lower floor. Can be used with clicked vinyl floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the adapter profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the adapter profile in the subprofile.
Produktinformation: Contents: 1 aluminum adapter profile (2000 x 31 x 8,5 mm) and 1 PVC subprofile
PGPRSILV Laminat tilbehør Kombistykke PGPRSILV
Kombistykke
PGPRSILV
T-stykke og reduktion i én. Plast-bundskinne. Egnet til højdeforskelle på 0 - 12,3 mm.
Produktinformation: 1860 x 47 x 16 mm
NYHED
NEVRADPCOMSILV Vinyl tilbehør Adapterprofil erhvervsmæssig brug NEVRADPCOMSILV
Adapterprofil erhvervsmæssig brug
NEVRADPCOMSILV
Subtle and elegant profile for use in commercial areas. Use the profile to make the transition between a higher and a lower floor, e.g. at a door entrance. Can be used with clicked Vinyl floors. Extra wear-resistant quality aluminium, silver tone. Installation with the supplied screws and plugs (installation without sub-profile). Screw at an angle of 90° into the subfloor (see technical drawing above). Tip: avoid fixing the floor too firmly between the adapter profile and the subfloor. Make sure you can still slide a piece of paper between the profile and the Vinyl floor.
Produktinformation: Contents: 1 pre-drilled aluminium adapter profile (2000 x 27 x 7,5 mm), screws (stainless steel 3,5 x 35 mm) and plugs (5 x 25 mm)
NYHED
NEVREXPSILV Vinyl tilbehør Ekspansionsprofil (Rigid) NEVREXPSILV
Ekspansionsprofil (Rigid)
NEVREXPSILV
This very slim and elegant profile can be used to cover the expansion joint between 2 floors of the same height e.g. at a door entrance or in a large room/corridor where an expansion joint is required. Can be used with Vinyl Click (+) floors. Wear-resistant quality aluminium, silver tone. Installation with the supplied subprofile. Glue the sub-profile to the subfloor, then press the expansion profile into the subprofile. Tip: use a hammer and e.g. the tapping block as a help to press the expansion profile in the subprofile.
Produktinformation: Contents: 1 aluminium expansion profile (2000 x 32,5 x 7,5 mm) and 1 PVC subprofile.
NEVINCPBASE Vinyl tilbehør Incizos aluminiumsunderprofil til trapper NEVINCPBASE1
Incizos aluminiumsunderprofil til trapper
NEVINCPBASE1
The Incizo® profile enables you to create stairs that fit perfectly into your interior. Various stair finishes are possible!
Produktinformation: 2000 x 33 x 17 mm

Trappeforkant

PGVSTPINGLUE Vinyl tilbehør Trappeforkant, lim, indre PGVSTPINGLUE
Trappeforkant, lim, indre
PGVSTPINGLUE
Til montering af Pergo Glue-vinyl på trapper og trin.
Produktinformation: 2000 x 25 x 25 mm
PGVSTPGLUE Vinyl tilbehør Trappeforkant, lim, ydre PGVSTPGLUE
Trappeforkant, lim, ydre
PGVSTPGLUE
Til montering af Pergo Glue-vinyl på trapper og trin.
Produktinformation: 2000 x 40 x 26 mm
PGVSTPCLICK Vinyl tilbehør Trappeforkant, klik PGVSTPCLICK
Trappeforkant, klik
PGVSTPCLICK
Til montering af Pergo Click-vinyl på trapper og trin. Af hensyn til sikkerheden skal man altid lime gulvpladerne fast på trappetrinnene!
Produktinformation: 2000 x 29 x 15 mm